The Savage AccuTrigger is renowned for its crisp, light pull, making it a favorite among many shooters. However, its adjustability can be a bit daunting for those unfamiliar with the process. This guide provides a step-by-step walkthrough on how to adjust your Savage AccuTrigger, ensuring a safe and accurate adjustment every time.
Understanding the AccuTrigger:
Before diving into the adjustment process, it's crucial to understand what you're working with. The AccuTrigger is a two-stage trigger system. The first stage is a relatively long, light pull that pre-sets the sear. The second stage is incredibly short and breaks cleanly. The adjustment process focuses on modifying the weight of this first stage pull.
Tools You'll Need:
- A small flathead screwdriver: This is essential for adjusting the trigger. Ensure it's the right size to fit the adjustment screw without causing damage.
- A trigger pull gauge (optional): While not strictly necessary, a trigger pull gauge provides precise measurements, allowing you to fine-tune the trigger to your exact preference. This is highly recommended for serious shooters aiming for consistency.
- A clean workspace: Avoid working on your rifle in dusty or dirty environments to prevent any damage to the internal components.
- Safety glasses: Always prioritize safety when working with firearms.
Step-by-Step Adjustment Guide:
-
Safety First: Begin by ensuring the firearm is unloaded and the action is open. Visually inspect the chamber and magazine well to double-check for any ammunition. Treat the firearm as if it were loaded at all times.
-
Locate the Adjustment Screw: The adjustment screw for the AccuTrigger is typically located on the trigger itself, usually a small screw that may be partially obscured by the trigger shoe. You might need to carefully examine the trigger to locate it.
-
Turn the Screw: Using your small flathead screwdriver, carefully turn the adjustment screw. Turning the screw clockwise increases the trigger pull weight, while turning it counterclockwise decreases the trigger pull weight. Turn the screw in small increments, typically ¼ to ½ turn at a time.
-
Test and Repeat: After each adjustment, carefully dry-fire the rifle (with the action open and the chamber empty). This allows you to feel the change in trigger pull. Repeat steps 3 and 4 until you reach your desired trigger pull weight. Remember to always keep your finger off the trigger until you are ready to shoot.
-
Use a Trigger Pull Gauge (Optional): If you're using a trigger pull gauge, measure the trigger pull weight after each adjustment to obtain precise readings and achieve your desired pull weight consistently.
Important Considerations:
-
Minimum Trigger Pull Weight: Do not adjust the trigger to an excessively light pull weight. This can compromise safety and lead to accidental discharges. A minimum weight of around 2.5 lbs to 3 lbs is often recommended for safety reasons. Consult your firearm's owner's manual for the manufacturer's recommended minimum pull weight.
-
Consistency: While a light trigger is desirable, consistency is paramount. Focus on achieving a consistent and predictable trigger pull weight rather than simply the lightest possible pull.
-
Professional Help: If you are uncomfortable adjusting the AccuTrigger yourself, it’s always best to seek the assistance of a qualified gunsmith. They possess the expertise and tools to perform the adjustment safely and accurately.
Conclusion:
Adjusting your Savage AccuTrigger allows for customization to your individual shooting style and preferences. By following these steps and prioritizing safety, you can fine-tune your trigger for improved accuracy and shooting performance. Remember, safety is paramount – always prioritize safe gun handling practices.
